HEPA Filtered Pass Through Cabinets and Chambers
HEPA Filtered Pass Through Cabinet for Hospital Pharmacy USP 800, shown open with removable panel
HEPA Filtered Pass Through Cabinets for USP 800 Pharmacies and cleanrooms are manufactured by CMP to allow restocking transfer of equipment and supplies while limiting clean room exposure to contaminants. CMP’s Stainless Steel HEPA Filtered Pass-Through Cabinets meet hospital, cleanroom, COVID facilities and pharmacy pass-through needs. Pass Through Consoles are configured to meet all your requirements. HEPA filter Pass Thru exceeds the U.S. Department of Energy High Energy Particle Arrestance (HEPA) standard by removing at least 99.99 percent of airborne particles 0.3 micrometers (µm) in diameter.
Hospital Pharmacy Pass Through Cabinets & Chambers
Pharmacy Pass Through Cabinets and Pass-Thru chambers meet USP <800> and USP <797> Clean Room Compliance for Pharmaceutical Compounding – Sterile Preparations.CMP designs medical pass thru cabinets for operating rooms, laboratories, veterinary clinics, pharmacies, hospital pharmacy anteroom, COVID surge facilities and production facilities that employ stringent isolation procedures.
Electronic Interlock Doors
CMP’s Pass Through Cabinets utilize an exclusive interlock system option to lock the opposing doors.
CMP’s Electronic Interlock System utilizes updated, state-of-the-art technology that 
ensures superior operational functionality as compared with the mechanical interlock systems of the past. This fail-safe design immediately locks the opposing door with a more secure safety seal. Mechanically interlocked systems do not hold as tightly.
Revit ® Families Available for CMP Pass Through Cabinets
Fire Rated Pass Through Cabinets Option Available
UL Labeled for 90 minutes t0 3 hours
Features
HEPA Filtered Pass Through Cabinets Features
pass through cabinet with indicator light to alert staff when door is open in the adjacent room. Red- door is open, green- door is closed
- Stainless Steel Construction
- Safety-Plate Glass Doors On Both Sides of Unit
- Adjustable Shelves
- Large Variety of Standard Sizes
- Lead Lined option for X-Ray Protection
- Electronic Interlock System Option
- Fire Rated Option available with Failsafe Activation
- Optional LED lights – dimmable illumination, long-lasting, and produce less heat
- Optional Syring Hopper
- Perforated Shelves
- HEPA fan/filter module Option- 99.99% efficient HEPA filter
- Timed interlock release delay 0-30 seconds
- Floor-Mounted Cart Pass Thru Option
Pass Through Cabinets Dimensions
- Widths: 24″, 36″, or 48″ (610, 914 or 1219 mm)
- Depths: 18″, 24″, 29″ , 36-3/4″, 44-3/4″, and 50″ (457, 610, mm)
- Height: 40″ , 76-1/2″ or 88-1/2″
HEPA Pharmacy Pass-Through Features:
- 99.99% efficient HEPA filter30% ASHRAE pleated type prefilter
- Variable speed control for airflow range from 250-400 CFM – cabinets
- Variable speed control for airflow range from 220-340 CFM – chambers
- 115v
- Energy efficient motor: Operating amps low as 1.6 for 115v
Continental Metal Products utilizes this new 99.99% efficient HEPA filter option in USP
Pharmacy 800 / 797 Wall Mounted Pass-Through Cabinets. Our exclusive Electronic Interlock System provides for the efficient transfer of supplies and drugs in and out of the cleanroom environment by locking one set of doors when doors in the opposing room are open. This maintains the air pressure of the cleanroom. The locking system withstands 500 lbs. of force. CMP’s HEPA Pass Through Cabinets exceeds the U.S. Department of Energy High Energy Particle Arrestance (HEPA) standard by removing at least 99.99 percent of airborne particles 0.3 micrometers (μm) in diameter.A motorized HEPA filter unit inside the Cabinet recirculates air through the cabinet’s inner sides. The HEPA filtered airflow is continuous. The on / off switch and variable speed control is located behind the access panel, as well as the interlock junction box. The prefilter can be changed easily by removing access panel. The HEPA filter is changed from inside the cabinet.
Specifications
Specifications
Continental Metal Products Stainless Steel Pass-Through Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. All exposed welds to be done by Heliarc process and ground and polished to match No. 4 finish. Pass-Through Cabinets can be selected and arranged in many different ways to accommodate the storage and operational needs of any institution.
The cabinets have a self-trimming perimeter flange that allows for an easy and clean installation into recessed openings. The wall opening on the other side of the installation is finished with stainless steel trim strips. The cabinets are also available with optional finished ends and tops. The cabinets can be mounted on a contractor built base or supplied with a stainless steel pedestal base. Glass doors contain ¼” thick safety plate glass. Entire front portion of door is punched and formed from one piece of 18 gauge stainless steel. Stainless steel double pan doors are also available. Doors are mounted on heavy duty chrome plated hinges and are secured closed using nylon friction roller catches. Two point knob lock doors are also available. Cabinets with shelves use pilaster strips that allow for height adjustment increments of ½”. The pilaster strips are easily removed to allow for proper sterilization of the cabinet and pilaster strip. Handles for doors are chrome plated. The cabinets contain one fixed mid-shelf and two adjustable shelves. The pass-through feature allows for loading of cabinet from corridor side. An electronic interlock system is optional which permits access to one side of cabinet at a time.
- Interlock power requirement is 15 AMPs /120V / 60HZ. Optional backup battery will last 6-8 hrs, in case of power failure.
- HEPA filter power motor and voltage options are 208-230 (50/60 hz) and 277 (60 hz).
Construction
Construction
Designed to be installed in-wall or OR, “Pass Through” Storage Console shall be constructed of Type 304 stainless steel with No. 4 finish. Welding is to be done by Heliarc process, exposed welds to be ground and polished to match No. 4 finish. Dimensions of unit are listed in the Specifications section. Console shall contain one fixed bottom shelf and three adjustable intermediate shelves.
Pass Through Doors
Both front and back of the unit shall be enclosed with two full-height, hinged, glazed doors with chrome-plated knob handles and stainless steel frame. Each door shall have 1/4″ (6mm) thick shatterproof, safety-glass panes. Two sets of doors shall enable loading of the cabinet from one side and unloading from other, thus permitting storing of surgical instruments without entering OR.
Options
Pass-Through Cabinets Options
- Fire-Rated Option available with Failsafe Activation
- Stainless Steel Door(s) or Glass Door(s)
- Stainless Steel Door(s) on Sterile Core Side and Glass Door(s) on OR side to meet HIPAA requirements
- Widths: 24″ (610mm), 36″ (914 mm ), 42″ (1067 mm) or 48″ (1219 mm)
- Depths: 18″, 24″, 29″ or 36-3/4″, 44-3/4″ and 50″ (457, 610, 736.6 or 914 mm)
- Height: 24″, 60″, 72″ or 80″( 1524, 1829 or 2032 mm)
- Lead Lined Unit for X-Ray Protection
- Catheter Slides
- Sealed doors
- Gaskets
- HEPA fan/filter module Option- 99.99% efficient HEPA filter – 29″ deep models
- LED Lighting for Cabinet Interior Illumination – Interior Light Option
- Dimmable LED lights – instant-on when doors are open
- Indicator light to alert staff – glows red doors are open- green doors are closed
- Tinted Glass – preventing room light from entering into the inner cabinet and protecting medications
- Laser Safety Acrylic
- Syringe Hopper
- Floor Mounted Cart Pass Through with Ramp
- Freestanding Installation with stainless steel base
- Mobile installation with lockable casters
- Battery back-up
- Additional Adjustable Shelves
- Taller edges and dividers on some shelves
- Timed interlock release delay 0-75 seconds (Programable in 5 second increments)
- Cart Pass-Throughs
- Pass Through Blanket and Solution Warmer
- Finished side panels and slope top
- UV sanitizing Module
- Keypad or keyed Lock
- Wireless Open Door Alarm
- No internal seams
- Automatic spring closing
Electronic Interlock System Option
CMP’s Exclusive Interlock system prevents either door from moving when the opposing door is open, protecting your OR, Operating room, Hospital Pharmacy Anteroom or clean room environment during material transfer. In this way, ensuring that the interlocked door cannot be forced open. Interlocking Doors are an important requirement in Pass Through Cabinets for USP 800 and USP 797.
Models
Pass Through Cabinet can be specified with either:
- Glass door(s) on Both sides – Pharmacy and Clean Room Installations
- Glass Door(s) on Operating Room side, with Stainless Steel Door(s) for privacy on the Sterile Core Side
Standard Sizes:
- HEPA fan/filter module Option- 99.99% efficient HEPA filter
- Timed interlock release delay 0-75 seconds (Programable in 5 second increments)
- Floor-Mounted Cart Pass Through with Ramp
HEPA Pass Through Cabinets (large units)
- SC2- 3660-29-PT- HEPA. 36” wide x 76-1/2” high x 29” deep
- SC2- 3660-50-PT- HEPA. 36” wide x 76-1/2” high x 50” deep
- SC2- 4860-29-PT- HEPA 48″ wide x 76-1/2” high x 29” deep
- SC2- 3672-29-PT- HEPA 36” wide x 88-1/2” high x 29” deep
- SC2- 4872-29-PT- HEPA 48 wide x 88-1/2” high x 29” deep
HEPA Pass Through Chambers (small units)
- SC2-2424-24-PT- HEPA 24” wide x 44” high x 24” deep
- SC2-2424-18-PT- HEPA 24” wide x 44” high x 18” deep
HEPA Floor Mounted Cart Pass Through Cabinets
- SC2- 3660-29-PT- HEPA-C. 36” wide x 76-1/2” high x 29” deep
- SC2- 3660-50-PT- HEPA-C. 36” wide x 76-1/2” high x 50” deep
- SC2- 4860-29-PT- HEPA -C 48” wide x 76-1/2” high x 29” deep
- SC2- 3672-29-PT- HEPA-C 36” wide x 88-1/2” high x 29” deep
- SC2- 4872-29-PT- HEPA-C 48” wide x 88-1/2” high x 29” deep
These models are part of our standard product line. Custom sizes are available.
Cut Sheets
Many other options and sizes available, Please contact us with your specific requirement
