Lead Lined Pass Through Warmers

Lead Lined Pass Through Warmers Features

• Electronic Interlock Option 
• Stainless Steel Construction
• Lead Lined for X-Ray Protection
• Clear lead glass windows with 2mm lead equivalency  at gamma levels of 150 KVP
• Over Temperature Alarm
• Optional Glass doors with ¾” thick Thermopane glass for maximum energy efficiency
• Electric heated compartments
• Separately Controlled Chambers
• Microprocessor control system
• Digital Display indicators
• Fahrenheit or Celsius temperature scale
• +/- 2 degree F. Accuracy
• Temperature Adjusting Lockout
• Customizable Temperature Settings/Limits
• Wire Shelves to maximize airflow
• Removable Pilaster Strips for easy cleaning
• U.L./CUL approved
• Optional “QUICK-TEMP” temperature monitoring system utilizing USB flash drive for data logging
• Optional stainless steel or epoxy coated baskets – available with drawer slides, available on all models, many sizes available
• Optional Casters for mobility
• Many Standard Sizes Available
• Custom Sizes
• Seismic anchoring
• Laser Safety Acrylic – Meets ANSI Z136.1

Lead Lined Pass Through Warmers Dimensions

• 18”, 24” or 30” wide X 21” or 27” deep  – 457 mm, 610 mm or 762 mm wide X 533 mm or 686 mm deep
• Single Compartment Height: 26”, 45”, or 74”  – 660 mm, 1143 mm, or 1880 mm
• Double Compartment Height: 60”, 72” or 74” – 1524 mm, 1829 mm or 1880 mm

 Lined Pass Through Warmers Service Requirements

120 VAC, 7 or 12.5 amps, 60 Hz, single phase electrical supply through a single connection to the integral circuit breaker panel.

Units are also available for 220/240V, 50/60HZ

Lead Lined Pass Through Warmers Construction

Continental Metal Products Warming Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish.

The heating chamber shall be insulated with 1 ½” thick fiberglass insulation. DSW1AE models contain one adjustable wire shelf and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾” thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a “pass-through” feature, enabling loading of the Warming Cabinet from either side of unit.

The Lined Pass Through Warmers / Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. All temperature settings and limits can be customized utilizing the buttons on the front control panel. Users can adjust limit alarm setpoint, delta alarm setpoint, low range setpoint and high range setpoint. A lockout feature is standard and can be enabled to prevent any adjustments to the current settings. An optional USB port can be provided on the front control panel for easy access to temperature history data utilizing a USB flash drive.

Lead Lined Pass Through Warmers Models

• DSW-2AE-PT-LL • Double Compartment Pass Through Warming Cabinet• Full Sized Model
  • Single or Dual Compartments
  • Two Compartments Heated or Upper Compartment Heated with Lower Storage Compartment
  • 30” wide X 74” high   (762mm W  x 1880mm H)   Outside Dimensions, 410 lbs.
  • Available in either 21″ or 27″ depths;  (533mm or  686mm deep)
  • Storage capacity 13.9 cu. ft (21″ deep) and 18.7 cu. ft (27″ deep)
  • Adjustable Wire Shelves
  • Can be ordered with Glass doors on both sides, or glass doors on OR side, Solid stainless steel doors on sterile core side

• DSW2AE-2258-18-PT-LL• OR Console – Double Compartment Pass Thru Warming Cabinet• 60″ High Model
  • 22” wide X 58” high (558.8mm W x 1473.2 mm H) Outside Dimensions, 278 lbs.
  • Single or Dual Compartments
  • Two Compartments Heated or Upper Compartment Heated with Lower Storage Compartment
  • 6.11 cu.ft total storage-
  • upper compartment 2.28 cu ft,
  • lower compartment 3.83 cu ft
  • upper compartment 12.13 “h x 18.56″ W x 17.50” d cu ft,
  • lower compartment 20.38 “h x 18.56″ W x 17.50” d cu ft,
  • Adjustable Wire Shelves
  • Solid doors both sides  

DSW-3AE-PT-LL • Small Single Compartment Pass Through Warming Cabinet

• • • • Single  Compartments
      • One Compartment Heated 
      • Can be ordered with Glass door on both sides, or glass door on OR side, Solid stainless steel door on sterile core side
      • 30” wide X 26” high   (762mm W  x 660 mm H)   Outside Dimensions, 210 lbs.
      • Available in either 21″ or 27″ depths;  (533mm or  686mm deep)
      • Storage capacity 3.8 cu. ft (21″ deep) and 5.2 cu. ft (27″ deep)

DSW1AE-FH-PT • Single Compartment Pass Through Warmer • Full Sized Model

• 30” wide X 74” high (762mm W x 1880mm H) Outside Dimensions, 400 lbs.

• • • • Available in either 21″ or 27″ depths;  (533mm or  686mm deep)
      • Two Compartments Heated or Upper Compartment Heated with Lower Storage Compartment
      • Storage capacity 14.8 cu. ft (21″ deep) and 19.8 cu. ft (27″ deep)
      • Adjustable Wire Shelves

 Lined Pass Through Warmers Available Options

18” or 24” deep (inside dimensions)	Left or right side door hinging
Clear Thermopane glass doors	74” high DSW1AE
Keyed door lock	Any Combination of Glass and Stainless Steel Doors One compartment unheated for Storage option
NEW! “QUICK-TEMP” temperature monitoring system USB Flash Drive support for temperature data logging (requires no software – one year temperature history)	Keypad or card reader operated electronic security door lock
Two heated chambers One heated and one unheated chamber providing storage in DSW2AE Stainless steel base for DSW1AE or DSW3AE Custom Sizes Wi-Fi and Ethernet temperature monitoring Stainless steel table many sizes, available with casters Seismic anchoring Laser Safety Acrylic – Meets ANSI Z136.1	Optional stainless steel or epoxy coated baskets – available with drawer slides, available on all models, many sizes available

Many Available Sizes in Stock

Cut Sheets, Revit Families, BIM Models & CSI 3-Part Specifications for Pass Through Blanket and Solution Warming Cabinets

Continental Metal Products provides Cut Sheets, Revit families, BIM models, and CSI 3-part specifications for CMP Blanket and Solution Warming Cabinets to support healthcare architects, medical equipment planners, and design teams. These resources streamline project planning, coordination, and documentation for hospital pharmacies, cleanrooms, and laboratory environments. CMP engineers  offers custom sizes and fast turn around on submittal drawings.

CSI 3-PART SPECIFICATIONS

CUT SHEETS & DRAWINGS

Revit FAMILIES & BIM MODELS

Seismic Anchoring Information

Seismic Anchoring Information

    Double Chamber Pass Through Warmer drawing

.  Small operating room pass through blanket solution warmer drawing

Small Single Chamber Pass Through Blanket Warmer drawing

🛠 View Preventative Maintenance Instructions

“QUICK-TEMP” Temperature Monitoring System Standard Feature for All CMP Hospital Blanket and Solution Warmers-spec sheet

REVIT FAMILIES – Contact CMP to request REVIT families BIM models of Blanket and Solution Warming  Cabinets
CSI 3-part specs – Contact CMP to request REVIT families BIM models of Blanket and Solution Warming  Cabinets

Many Other Features and Options Available – Please see Specifications, Options & Cut Sheets