CMP has been manufacturing Stainless Steel Storage Cabinets for over 60 years. Our Storage Cabinets are fabricated to the highest standards and offer an array of storage solutions. CMP Storage Cabinets can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty.
Features:
|
|
|
Specifications
| OR Storage Consoles: | Dimensions: |
|---|---|
| SC1 Accessory cabinet with peg board and hooks |
|
| SC2 Storage cabinet with adjustable shelves and shatter-proof glass |
|
| SC3 Desk cabinet with fluorescent light and four lockable drawers mounted on ball bearing slides |
|
| SC4 Supply cabinet with adjustable shelves |
|
| DSC5 Solution/Blanket warming cabinet with electric heated compartment |
|
| Pass-Through available in All Cabinets and warmers |
Service Requirements for Warming Cabinets:
- (One Compartment Heat) – 120V, 60HZ, 1PH, 7 Amps
- (Two Compartment Heat) – 120V, 60HZ, 1PH, 12.5 Amps
- Units are also available for 220/240V, 50/60HZ
Construction:
Continental Metal Products Stainless Steel Storage Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. All exposed welds to be done by Heliarc process and ground and polished to match No. 4 finish. Storage cabinets can be selected and arranged in many different ways to accommodate the storage and operational needs of any institution.
The cabinets have a self-trimming perimeter flange that allows for an easy and clean installation into recessed openings. The cabinets are also available with finished ends and tops for freestanding installations. The cabinets can be mounted on a contractor built base or supplied with a stainless steel pedestal base. Glass doors contain ¼” thick safety plate glass. Entire front portion of door is punched and formed from one piece of 18 gauge stainless steel. Stainless steel double pan doors and sliding glass doors are also available. Doors are mounted on heavy duty chrome plated hinges and are secured closed using nylon friction roller catches. Two point knob lock doors are also available. Cabinets with shelves use pilaster strips that allow for height adjustment increments of ½”. The pilaster strips are easily removed to allow for proper sterilization of the cabinet and pilaster strip. Drawers are mounted on ball bearing slides and contain pullout stop and roll-out prevention. Handles for doors and drawers are chrome plated. Cabinets are also available with doors on both sides as a pass-through feature to enable loading of cabinet from corridor side.
For Warming Cabinets, the heating chamber shall be insulated with 1 ½” thick fiberglass insulation. DSC5 models contain two adjustable wire shelves and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾” thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a “pass-through” feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet.
Cabinets and Nurse Documentation Stations can be configured to the user’s specific requirements. Electrical outlets and wire routing holes can be located as required. Contact CMP for more information.
Models
|
|
|
|
|
|
|
|
|
|
|
|
Options
|
|
|
|
|
|
|
|
|
|
|
|
|
|
