CMP Autopsy Tables are high quality stainless steel tables, counter, and sink units. Our Autopsy Tables have been designed for the functional requirements of an Autopsy laboratory. CMP Autopsy Tables have evolved into the industry standard for this application. CMP has been building high quality stainless steel Autopsy Tables for over 65 years. CMP products can be found in almost every hospital, mortuary, and crematorium in the U.S. and can be configured for your unique requirements.
CMP’s Model H-2008 Autopsy/Dissecting is a result of extensive study and research of work flow of pathologists and diener. The facilities required for post-mortem procedures have been provided and arranged to minimize unnecessary steps. The need for a separate dissecting table has been eliminated.
- Stainless Steel Construction
- Removable Waste Strainer Basket
- Coved Sink (H-2008 Model contains 2 Coved Sinks)
- Suction Hose with Reversing Valve
- Chrome-Plated Gas Cock
- Continuous Flushing System
- Hot and Cold Water Faucets with Wrist Blades
- Gooseneck Spout
- Vacuum Breakers
- Lever-Action Waste Control
- Rubber Headrest
- Rubber Cutting Board
- Irrigation Hoses and Thermostatic Mixing Valves
- Electrical System
- Removable Utility Drawers
Width: 100″ wide (2540 mm)
Depth: 32″ (813 mm)
Height: 34” high (864 mm)
CMP Autopsy Tables are completely inter-piped and inter-wired, requiring only one single connection for each service. Required service connections are ½“ I.P.S. for hot and cold water supplies; 1½“ for waste. The unit has two waterproof 115-volt electrical outlets.
CMP Autopsy Tables are constructed with built-in 12” (305 mm) x 20” (508 mm) x 11” (279 mm) deep sink shall be fabricated of No. 14 gauge stainless steel for top and sinks and 20 gauge in cabinets, welded ground and polished to one-piece, coved-corner construction.
CMP Autopsy Tables have a top working surface left of sink shall be pitched to separate waste. Sink shall be complete with hot and cold water faucets operated by wrist blades, gooseneck spout, vacuum brakers and lever-action waste control with overflow. Adjacent to the faucet is a hydro aspirator for both suction and flushing use with built-in vacuum breaker. Rubber Headrest is standard.
H-2008 models feature a rubber cutting board with stainless steel legs to allow flushing underneath with bumpers to keep board steady. Six stianless steel slats in top are to be easily removable. Stainless steel perforated cover is to be provided for waste trough on both the dissecting table and the autopsy table. Contains two 12” (305 mm) x 12” (305 mm) x 10” (254 mm) deep coved-cornered sinks. Standing overflow pipe is provided for one sink. Disposal is available for one sink bowl and there is a dry work area for accessories and preparation of specimens.
CMP Autopsy Tables have a Right-hand pedestal base that contains an aspirator, irrigation and thermostatic mixing valves. Suction and irrigation hoses are located under the top front edge with all fittings, piping, and hardware chrome-plated. The Suction hose is powered by a water aspirator with reversing valve for cleaning. The Gas Cock is chrome-plated and the continuous flushing system eliminates cleaning problems.
Drawers and cabinets have been provided for storage of instruments, plastic bags, saws, etc. Cabinet and drawers have coved-corners, and drawers are to be easily removable for cleaning. The table is constructed entierly of stainless steel and has coved corners in all working areas for ease of cleaning.
- Instrument Tray with Hard Rubber Cutting Board
- Waste Disposer, ½ hp
- Trough Flushing System
- Gas and Air Outlets
- Weatherproof Duplex Electrical Outlet
- Graduation of Top Edge in Centimeters
- 6” (152 mm) Wide Body Slats